Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Suspension (http://www.gasgasrider.org/forum/forumdisplay.php?f=16)
-   -   Help Identifying Forks (http://www.gasgasrider.org/forum/showthread.php?t=21715)

risk74 08-07-2016 01:56 PM

Help Identifying Forks
 
2004 EC 300. Forks are gold in color. Sliders are 48mm. Five small grooves around top of fork. Need to find seals/wipers, but not even sure of the make. Assuming Marzocchis? Did they come stock on 04s or have these been swapped? Thanks.

http://i65.tinypic.com/rc6ddf.jpg

john r b 08-07-2016 05:10 PM

Possibly Ohlins maybe sach??

risk74 08-07-2016 05:40 PM

Starting to think Ohlins. Rear shock is Ohlins. Seal dimensions match Ohlins specs. Need to know oil capacity as well. Thanks.

risk74 08-08-2016 09:50 AM

Confirmed, they are Ohlins. Can anyone suggest a place to get seals/wipers and bushings from? I've searched and can find the seals, but no luck with bushings.

Possibly KYB stuff crosses over?

hadfield4wd 08-08-2016 02:14 PM

https://www.ohlinsusa.com

john r b 08-08-2016 04:14 PM

contact Stacy Berger @ Ohlins Located in N.C.

Zman 08-14-2016 09:49 PM

Les at LTR uses KYB fork seals in the Ohlins. Are they 46mm or 48mm?

risk74 08-15-2016 06:23 AM

Quote:

Originally Posted by Zman (Post 170152)
Les at LTR uses KYB fork seals in the Ohlins. Are they 46mm or 48mm?

They are 48mm. Found seals and bushings for them. Now if only I could find the protectors that go on the outside of the fork leg to protect it from the fork guards.


All times are GMT -5. The time now is 01:50 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org