This is what if did to my forks after a few revalves it's pretty close to stock beta
I followed leons ( used to be here but bought a beta) thread on betariders.
I think the beta red legs may have a different mv gap....Steve?
Inners have been bushing land machined.
No bottoming for me with this but any less than 350cc will have you running close, 330 and it's clank!
Reb
12.15
20.1(3)
17.1
14.15
11.2(2)
Mid
12.15
20.1(4)
11.2
15.15
16.15
18.15
(May end up less float but currently like it)
Base
28.1
12.1
32.15(2)
32.1(4)
14.1
24.1
22.1
20.1
18.1
10.2(2)
Will be adding 32.1
.48 spring and 5.8 rear.
350cc maxima 7wt racing ff comp6 reb 15 .75 turn pfp
I've gone away from winding in the reb till just b4 packing, I like less rebound now that the back has less lsr, and you can run more comp without harshness.
This is the Leon thread.
http://www.betarider.org/forum/viewtopic.php?f=17&t=144
I thought that the beta being heavier and a 4t that it would work well with my weight, springs and Leon has ridden a lot of good suspension is I would trust his judgement, as well as NP on Dbw whom rates the beta valving.