Quote:
Originally Posted by philm
These are the part numbers and specifications from the manual found at https://www.ohlins.com/app/uploads/w...M_07295-17.pdf
Part numbers-Spring rate: (depending on models)
2428-39: 3.9 N/mm
2428-41: 4.1 N/mm
2428-43: 4.3 N/mm
2428-45: 4.5 N/mm
2428-47: 4.7 N/mm
Fork lengths and diameters
Front fork ?48
?A ?B Length (L)
53.9 mm 59.3 mm 938 mm
Front fork ?46
?A ?B Length (L)
53.9 mm 58.4 mm 938 mm
Rebound and compression adjustment
Refer to mounting instruction for set-up data.
Maximum open rebound and compression valve:
20 clicks.
Free Spring Length:
All forks: 467 mm (service limit 460 mm).
Spring preload:
Maximum allowed adjustment
range 4-8 mm (with optional spring supports). |
Thanks, that's what I found too, but they do not seem to be available from Ohlins any more. I found some comparable springs from Race Tech and have ordered those. The only differences is the free length is 472mm, which will give me 5mm of pre-load, which I think I can live with.