Well. . . Icould pop ddownstairs, prop the front up and take the axle out. . . but if there are any changes between 2006 yz clamps and whatever you have plus the 07gg front wheel and bearings I used then it would be putting you crook.
Its real easy to do the change, use the oversize gg spacers and add a washer or two to get the wheel in the middle from the butside of the axle. Measure from rim to fork and on other side. You can then add spacer to the other side and measure gap to thick part of axle. Then recreate in proper size id spacer.
Remember the floating section of the axle means you have a little leeway as long as you clamp that side up after nut is tight and bounce on it.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
|