Hi - just been reading that post and another related to Pobit.
I've found a mention of 5mm preload on the fork springs no mention of how long the pre-load tube is as stock.
As for seperating the upper/lower fork tubes the manual says just pull hard - any comments - how hard should I be pulling? Can i damage anything?
It looks like the lower bushing is contacting the upper bushing when trying to seperate the tubes - is that right? Do you just end up pulling the lower bushing out?
__________________
'05 Gas Gas 300
'97 Aprilia Pegaso 650
'99 KTM 200
'95 ish XR630 (died many times in Oz)
|