Today I measured the thickness of the shims between the 05 and 06 and found they are differant also.
06 stk 05 stack
11x20
22x10 21x10 the 21mm face shim does not completely cover the ports on the 05 so there is some bleed.
11x20 11x10
19x10 19x10
17x10 17x10
11x10 11x10
16x10 16x15
16x10
15x15 15x15
14x15 14x20
14x15
13x20 13x20
12x20
Notice the 1st cross over is a thicker 11x20 in the 06 stack and the doubling up of the thinner 16x10 and 14x10 with the smaller 12x20 pivot. Keep in mind the 06 valve uses a 2mm bleed in one of the ports compared to a 1mm bleed in the 05. Anyone care to comment on what GasGas was thinking with the new specs? Dave
Last edited by pobit; 02-24-2007 at 11:16 AM.
|