[twowheels]

It must be the moon rocks in Sweden, because the stock EC (250/300) forks feel pretty decent on small stuff in Michigan. Not so much on the slap downs, but overall really good for out of the box legs.

HOWEVER - check the forks carefully and take action on this - I found the 1.0mm thick spring spacer ring on the top of the spring cracked and coned. The springs have very little pre-load to begin with so my plan was to replace the original with a 3.0mm spacer, but if this had completely broken it would have been catastrophic.

The forks look good as far as construction goes, but with some odd-dimensioned components, but the work to modify the compression tap and valve stack for increased tuneability continues.