I am a bit embarrased to admit I finally got around to setting the static sag on my bike. Before I monkeyed with it it was set to nearly 60mm(no preload at all. I set it to 30mm and gave it a test ride. Huge difference, the rear end semms much more active now, the bike used to feel like it had a flat all the time. I may increase the compression dampining a little next time out. The front end felt very twitchy which should be solved by dropping the tubes in the clamps. I am also planning on taking my sag scale(string and some tape) riding with me to have a friend measure the sag with me on the bike. You guys talk about 10-12mm preload, is that on the shock body or is that measured static sag.
Paul B
Thanks for the info, this board rocks!
|