Hahah! Good luck.
What would you like to know? Are they the Sachs with the adjustable preload or no?
Be CAREFUL with the rebound adjuster. Many have cross threaded them on reassembly, and replacements are non existant.
48mm KYB bushings and seals work a treat as far as consumables go.
Air gap 110-130mm.
Basic OC fork - just watch the rebound adjuster. My advice is to push it out of the cap once the cap is off the damping rod. On reassembly thread the adjuster into the damping rod. Then put the cap over the top and thread that down.
