Quote:
Originally Posted by Panagiotis
So replacement bearing arrived and i removed the shock to find that the bearing was ok but the two spacers which the bolt goes through had too much clearance so i need these two spacers replaced .
I removed them using a punch and a small hummer and because of the deformation by the punch the bolt now fits tight , so i packed the bearing with grease and pressed the spacers in and fitted the shock back i had to tap the bolt with a hummer to get it through the shock .
I will see if this last until i find the spacers and replace them .
|
Hi, my Ec250 2009, has a sachs shock, and i need the upper kit, but i can?t find the correct part, manual doesn't mension it, just the bottom..
Can you tell me how i can find the Upper shock bearing kit?