Put your top cap back on. Compress the fork upside down. You can put the axle back in and jamb it under your work bench if you have to. Then remove the base valve. may require an impact gun. I use a small 3/8 drive butterfly impact myself as it just has enough torque to do the job without the risk of doing damage to the fork. Then go back and remove your top cap. There is a good article on LTR's website on the dis-assembly of this fork. I would highly recommend you you have a look at it before you continue. There are some points that you need to know about the fork caps, that differ from the zokes. You do not need to remove the allan screw and fork end.
__________________
2018 EC 300
|