|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Stock settings for '99 EC200? HELP!
Just rebuilt the front and rear suspension to stock specs, no revalving. I found the manual for the front marzocchi forks, conventional. It says to not go farther then 2 clicks from the factory setting in either direction.
What is the stock factory settings? I don't have a manual for the ohlins rear shock. Does anyone know where to start with it? |
#2
|
||||
|
||||
I'd count all the clicks and start somewhere around the middle. Start slow and dial it in with the feedback the bike gives you.
|
#3
|
|||
|
|||
Thats what I've been doing. What to see where I am according to where gas gas thinks I should be.
The front feels a bit harsh/stiff/firm in the middle of the compression adjuster. Went out 3 clicks from centered and it is better but not as soft as I like it. At 5 clicks out, from centered, on compression it starts to get a nervous slight head shake. Also, the front wants to washout. No grip in corners front slides all over the place. I run S12s that are still very good, only about 2 hrs on them. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2010 Sach stock suspension settings? | 007neil | Enduro Suspension | 4 | 06-20-2012 02:14 PM |
Stock 2012 ec 300 race stock clicker settings please. | bones150 | Enduro Suspension | 0 | 05-13-2012 08:16 PM |
02 ec 200 stock settings | Airborne | Enduro Suspension | 0 | 06-24-2007 07:49 AM |
03 ec 200 stock settings? | Airborne | Enduro Intake/Carburetion - 2 stroke | 0 | 06-24-2007 07:45 AM |