|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
2012 Guillaume race edition wheel spacers
Hello all,
Long story short, I had a local mechanic change over a rear tire and tubliss on my 2012 Gas Gas EC 300 Guillaume race edition bike. It appears he has provided me with the wrong wheel spacers, therefore I am in search of the correct ones. The kicker is the Guillaume race edition bikes came with Haan brand hubs. I have ordered the rear wheel spacers for a regular EC 300, although the fitment is wrong as it appears the Haan hubs are slightly narrower. I am wondering if anyone else with the Guillaume edition has run in to this issue and what spacers worked for them. Any recommendations and photographs that may speed up my chance locating the correct set would be greatly appreciated as I am running out of options. Thank you in advance, Tyler |
#2
|
|||
|
|||
Spacers
Have you tried motocross center?
http://www.motocrosscenter.com
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar |
#3
|
||||
|
||||
My best suggestion is to measure it all up and have someone make them for you. Anyone with access to a lathe should be able to do it quite easily.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc Last edited by Anders; 08-24-2023 at 09:25 AM. |
#4
|
|||
|
|||
Quote:
Thanks for the reply, appreciate the help! |
#5
|
||||
|
||||
If you're really in a pinch, you could always just stack some thing washers between your existing spacer and the swing arm. A good hardware store will have that stuff.
|
#6
|
||||
|
||||
Yep, I've done that before myself without issue.
__________________
WildAzzRacing YouTube channel Trail Riders of Southern AZ club AZ State Parks OHV Ambassador '11 EC250R '98 KDX220 |
#7
|
|||
|
|||
Spacers
Have you tried motocross center? http://www.motocrosscenter.com Awesome, I?ll have a look and see what I can come up with! Thank you for the response.[/QUOTE] |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
EC 300 2012 Rear Wheel Spacers | exman | Enduro Engine - 2 stroke | 7 | 12-15-2018 07:59 AM |
wheel spacers | kpuc11 | Enduro Chassis & Body | 9 | 10-16-2016 05:14 PM |
ec 200 wheel spacers | gump147 | Enduro Chassis & Body | 6 | 03-05-2015 10:35 AM |
Wheel spacers. | Ud_luz | General Discussions & Announcements | 15 | 07-10-2012 11:16 PM |