Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Suspension

Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 08-05-2014, 04:16 PM
n_green n_green is offline
Senior Member
 
Join Date: Jun 2012
Location: Sydney, Australia
Posts: 675
Default Suspension Examination:

After getting my suspension revalved by a tuner (and being happy with it) I was disappointed to find everything seemed to be softening up. My thoughts are its a combo of things
A) I got the suspension revalved when the bike was brand new, now everything is bed in there is a lot less friction and this has caused everything to become softer.
B) IMO I am riding quicker on this new bike, whether it's the bike itself or the suspension that have given me more confidence I don't know.

I am going to speak with the tuner and see if I can get it tweaked again to firm it up where it needs firming up, to make sure I was accurately reporting what the bike was doing I took this video:
http://youtu.be/sDPESqTMKUA

So my thoughts are that LSC front and rear is on the soft side. The g-outs I'm hitting are pretty intense and I'd expect the suspension to bottom on these but GENTLY. At the moment the sound of the front forks smashing into the bottoming cone and the tyre hitting the front guard isn't pleasant. I'm 3clicks out on LSC clickers so it's definitely the valving.
The shock is the same although not as bad, I don't know if I'd want it firmed up at the moment as it does squat and grip really well on hills etc plus I think I am still about 10 clicks out on LSC which is just under halfway out (total of 26 clicks)

Rebound is fine both ends, no pogoing or pushing and both ends stick like glue to the terrain even when riding off camber bumpy rocks. I will check the forks though as I think I'm in a fair way on the reb clicker to get it behaving this way.

HSC I'm not too sure with the forks, I suspect they could use firming up a tiny amount, I can feel them blow through the stroke on occasions instead of firming up. The rear i initially thought was too soft and it was blowing through then bouncing back of the bump stop but looking at the video it's just firming up and not moving past 3/4 travel. It'd be nice if the reiger shock had a HSC clicker as I could probably tune the spike out with that clicker...
__________________
Current:
2014 Gas Gas EC300R
_____________________________________________

Previous:
2011 Gas Gas EC300 ELC
2004 KTM 300 EXC
Reply With Quote
 




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Slo Mo suspension Fred1956 Enduro Suspension 12 03-28-2014 02:46 AM
help with 03 200 suspension XR250R64 General Discussions & Announcements 0 09-10-2012 07:20 AM
same suspension ec 200 and ec 300? hannesd Enduro Suspension 3 05-13-2012 04:18 PM
EC 200 Suspension Gas Huffer General Discussions & Announcements 3 11-13-2007 10:34 AM
Suspension FAQ webmaster Enduro Suspension 12 09-18-2006 03:56 PM




All times are GMT -5. The time now is 03:40 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org