|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#34
|
||||
|
||||
I assume the difference in the base valve between ec and fse is due to both models having the same spring ratios stock, and that the fse is 15 kg heavier. If ec is oversprung/undervalved or fse that is undersprung/overvalved i leave to the designers.
Since no suspesnsion experts have yet commented my last post, I have used info from threads here to put together a well guessed valving. Base valve 22x10 22x10 11x10 19x15 removed crossover here as per glenn's suggestion 17x15 15x15 13x20 My rebound stack has grown significantly 21x10 20x10 19x10 17x10 17x10 15x10 15x10 12x10 This is based on pobit's stack, and I threw in a couple of extra high speed at the bottom for extra compensation of higer spring rates. I have not made any test runs on this setup yet, but the high speed release from having the fork almost fully compressed is greatly reduced, I can hear a nice 'swoosh' from the rebound stack. It'll probably be a while before any real tests, but I'll keep you posted. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Marzocchi Shiver 45 fork springs | Klausen | Enduro Suspension | 9 | 12-19-2009 04:55 AM |
Marzocchi 45mm Shiver manual | super_rat | Enduro Suspension | 1 | 01-01-2009 10:24 PM |