|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
45mm shiver stiffer (street/SM)
Running Ec300 on the street With supermotard Wheels and big-brake kit, the suspension is pretty terrible. It dives just touching the front brake. Compression is maxed out.
i am 87kg With gear on, bike is a 06 300EC so guessing With fluids, maybe a 103-105 kg? Without knowing too much about forks, and since the forks are nearly in bottom when going from 70mph-0, guessing I would need New springs and some revalve and New oil? Is this a job that average+ skilled hobby-mechanic can do in a workshop?
__________________
07` EC300SM. 09` KTM 250EXC. 70`CB350 |
#2
|
||||
|
||||
Springs first. Preload will not help.
Try find a super motard forum.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#3
|
|||
|
|||
Quote:
By the way; you have alot of good posts with good info!
__________________
07` EC300SM. 09` KTM 250EXC. 70`CB350 |
#4
|
||||
|
||||
My suggestions would be in NZ so not much use I guess
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#5
|
|||
|
|||
I'm going through the same thing at the moment with my EC300 SM, the WP43s fitted top out when you open the throttle, and dive when you close it. My plan is to shorten the forks and fit shorter, uprated springs. The problem with the WPs is that there are NO springs available, meaning i'm having to have them custom made. You should be able to get springs to suit your Marzocchis, you just need to measure the length and diameter of your original springs, decide how much you want to up-rate them and look here: http://www.racetech.com/page/title/F...0Spring%20List
to find suitable replacements. Then order from your nearest racetech dealer from the list here: http://www.racetech.com/page/id/72 Beware though, not all the springs on that list are available, I wasted time trying to order some that would suit my WPs, to find they'd been discontinued. I'm going up from 0.38s to 0.44s. |
#6
|
|||
|
|||
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#7
|
|||
|
|||
Quote:
__________________
07` EC300SM. 09` KTM 250EXC. 70`CB350 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
marzocchi 45mm shiver | johall865 | Enduro Suspension | 0 | 12-28-2014 06:55 PM |
wtb marzocchi shiver 45mm | mbogage | "Wanted to Buy" & "Want To Trade" | 7 | 04-06-2014 09:46 AM |
wtb marzocchi shiver 45mm | mbogage | Parts | 1 | 01-12-2014 09:21 PM |
Marzocchi Shiver 45mm piston | mcnut | Enduro Suspension | 7 | 01-15-2012 08:40 AM |
Marzocchi 45mm Shiver manual | super_rat | Enduro Suspension | 1 | 01-01-2009 10:24 PM |