#21
|
|||
|
|||
Quote:
__________________
2003 txt250 Pro 2013 Ossa 280i |
#22
|
||||
|
||||
Quote:
__________________
Noah 2000 EC250 with 2011 transformation kit, KYB SSS forks, MN street title 16' Ski-Doo XS Renegade X 1200 4T 16' Specialized Fatboy trail 02' ZRX 1200r R.I.P. 72' Olds 500ci, Batten Heads, Street/Drag car, former CarCraft magazine centerfold (has-been) 15' TW200 |
#23
|
||||
|
||||
yeah I have a lathe if I need to knock up some more wheel spacers. I was going to whip the wheel off and dummy up the forks in the triples & see where I'm at. There is a mill at work if I need to make a stepped plate arrangement which is most likely. . . . But it turned a bit cold & windy last night (middle of winter here) and the walk down the stairs didn't seem as appealing as watching TV next to the wife.
Have to also check if the inside front wheel centre spacer will need to be remade with the smaller ID bearings. I'm also battling the urge to jump right in. I can still ride the bike like it is, but I need to pull the shock out as its leaked oil & the base gaskets were also seeping. Also I'm building a roadrace bike engine & the cylinder will be back soon from a mates machine shop so I'll need to do some more porting & get it welded. All this costs money, so its a matter of timing so I don't have several bikes in pieces & not the money to get them all back together + immovable items with bits hanging off them. |
#24
|
||||
|
||||
My 47mm showa swap http://www.gasgasrider.org/forum/showthread.php?t=12271
|
#25
|
||||
|
||||
Cool, thanks for sharing.
My Zokes had already been revalved & were a heap better than std (esp on tree roots) but they still beat me up. On the way home from BermBuster last weekend my mate was driving & I did a few min research on the cellphone & came up with a plan thanks to this forum. hopefully it makes riding more comfortable on the choppy stuff. |
#26
|
||||
|
||||
Hey did anyone write down what the steering head bearing dimensions were?
Just want to double check, I mean it is possible that the shaft size & frame size is the same between the GG & YZ, but I'd be bummed if I ordered the bearings & they were different between some model years or whatnot. |
#27
|
||||
|
||||
Quote:
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#28
|
||||
|
||||
Sweet that gives me a starting point. I have the shaft of the YZ so I can measure that & order when the time comes. Thanks
|
#29
|
||||
|
||||
Quote:
__________________
Noah 2000 EC250 with 2011 transformation kit, KYB SSS forks, MN street title 16' Ski-Doo XS Renegade X 1200 4T 16' Specialized Fatboy trail 02' ZRX 1200r R.I.P. 72' Olds 500ci, Batten Heads, Street/Drag car, former CarCraft magazine centerfold (has-been) 15' TW200 |
#30
|
|||
|
|||
Are there any issues with using 2011/12 kyb forks with 2007 yz triples? any changes to the offsets between those years? I see the caliper changed so it will be a different braking adapter to the 2007 fork
__________________
2003 txt250 Pro 2013 Ossa 280i |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Which used forks do I have? | wmcpb04 | Enduro Suspension | 17 | 06-11-2013 07:59 PM |
forks | robicon | Enduro Suspension | 2 | 05-08-2012 02:42 PM |
43 mm wp forks. | jhendr3702 | Enduro Suspension | 4 | 10-18-2010 06:46 PM |
forks | sen480 | General Discussions & Announcements | 1 | 03-25-2010 04:54 AM |