|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
2018 EC300 Front and Rear Stock settings
So seeing as everyone else is lazy and hasn't pulled their forks and shocks apart for my own curiosity I had to do it myself!
KYB Front forks Compression base valve: 11x0.3 (3) 20x1.7 (base plate) 14x0.3 (6) 16x0.11 18x0.11 20x0.11 22x0.11 24x0.11 26x0.11 28x0.11 30x0.11 32x0.11 21x0.11 32x0.11 (11) Piston Check valve Spring Collar Nut Mid valve: Compression Stepped washer 8x0.2 Collar Spring 17x0.3 15x0.3 11x0.3 12x0.11 14x0.11 16x0.11 18x0.11 20x0.11 (4) Piston (had the usual bleed hole forgot to measure it) 20x0.11 (3) 12x0.11 18x0.11 16x0.11 14x0.11 12x0.11 11x0.11 16x1.5 (base plate) Nut (Float was 0.7mm in the above stacks) KYB Rear Shock: Compression: 22x0.3 24x0.3 26x0.3 28x0.3 30x0.3 32x0.3 34x0.3 36x0.3 38x0.3 28x0.11 32x0.11 40x0.2 (10) Rebound: 36x0.2 (7) 28x0.11 36x0.3 34x0.3 32x0.3 30x0.3 28x0.3 26x0.3 25x0.3 24x0.3 23x0.3 26x0.4 Hope this helps some one! I stiffened up the rebound damping on both the shock and forks and softened the compression in the base valve as I was most of the way out on the clickers and mostly in on the rebound. I added a 5.8kg/mm rear spring and some 0.46kg/mm springs up front. Not massive changes as it is pretty good out the box! New settings: KYB Front forks Compression base valve: 11x0.3 (3) 20x1.7 (base plate) 14x0.3 (4) <removed 1 12x0.12 <added this 14x0.3 <moved here from above 16x0.11 18x0.11 20x0.11 22x0.11 24x0.11 26x0.11 28x0.11 30x0.11 32x0.11 21x0.11 32x0.11 (11) Piston Check valve Spring Collar Nut Mid valve: Compression Stepped washer 8x0.2 Collar Spring 17x0.3 15x0.3 11x0.3 12x0.11 14x0.11 16x0.11 18x0.11 20x0.11 (4) Piston (had the usual bleed hole forgot to measure it) 20x0.11 (3) 14x0.11 <this replaced the 12x0.12 18x0.11 16x0.11 14x0.11 12x0.11 11x0.11 16x1.5 (base plate) Nut (Float was 0.7mm in the above stacks) KYB Rear Shock: Compression: 22x0.3 24x0.3 26x0.3 28x0.3 30x0.3 32x0.3 34x0.3 36x0.3 38x0.3 28x0.11 32x0.11 40x0.2 (10) Rebound: 36x0.2 (7) 28x0.11 36x0.3 34x0.3 32x0.3 30x0.3 28x0.3 26x0.3 25x0.3 24x0.3 removed the 23x0.3 here 26x0.4
__________________
Back on a gassy! 2018 EC300! 🤘 Txt 280 07 to make me feel like a gumby again Last edited by Gasser Nate; 10-23-2019 at 02:23 AM. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Stock settings - Homologation vs Competition | jerrytlr | Enduro Intake/Carburetion - 2 stroke | 6 | 09-30-2013 04:20 AM |
Stock settings for '99 EC200? HELP! | RD350 | Enduro Suspension | 2 | 07-25-2012 07:54 AM |
Stock 2012 ec 300 race stock clicker settings please. | bones150 | Enduro Suspension | 0 | 05-13-2012 08:16 PM |
02 ec 200 stock settings | Airborne | Enduro Suspension | 0 | 06-24-2007 07:49 AM |
03 ec 200 stock settings? | Airborne | Enduro Intake/Carburetion - 2 stroke | 0 | 06-24-2007 07:45 AM |