|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Swing arm help
Hi,
New to the forum after recently buying a 2017 ec250 racing I need to replace the swing arm bearings /bushings and cannot for the life of me find the 2017 ones Some people have said they diddnt change from 2011 to 2019 but I'd rather know for sure off someone who has replaced them on a 2017 All balls list all years except 16 and 17 from what I can find Can anyone advise Many thanks alex |
#2
|
||||
|
||||
2018 on up are different.
Stay away from All Balls. Cheap Chinese junk. I've had good luck with Factory Links. https://www.cpd-usa.com/shop/sak-g-0...ing#attr=18024 |
#3
|
||||
|
||||
Quote:
The 17 chassis is the same as the 15. I recently bought the swingarm and link bushings for my 15 from the Norwegian importer who got them from Spain (Rieju, I presume). I All Balls lists 14 and 15, they should also fit 17. I'm pretty sure about that, as the 17 is only a 15 with slightly different decals. The bearings can be found in any good bearing supply, they are HK2216 and DL 2216
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#4
|
|||
|
|||
Thanks everyone I will look into it
|
#5
|
|||
|
|||
I have attached a pic of said bike the logbook says ots a 2017 but may be registered late ? Really not sure...but was bought as a 2017
|
#6
|
||||
|
||||
Good looking bike. While not the answer to your original question - I'm with gasgasman. I've found Factory Links to be of good quality and excellent customer service. I would recommend!
Jeff
__________________
'18 GG XC 300 '05 GG DE 300 '01 GG txt 321 |
#7
|
||||
|
||||
Top notch been buying from them for years
__________________
02 EC 200 03 MC 250 88 VT 800 01 TXT 280 |
#8
|
||||
|
||||
That is an 18 model as far as I can see
Sent fra min YAL-L21 via Tapatalk
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Swing Arm | CanGasser | Enduro Chassis & Body | 0 | 09-08-2016 12:05 PM |
Swing arm Nut | Danj56 | Enduro Suspension | 2 | 02-22-2016 10:35 AM |
Need swing arm plugs! | HooliKen | Enduro Chassis & Body | 6 | 01-19-2016 05:01 PM |
Swing Arm Assembly | mcnut | Parts | 1 | 12-09-2014 09:39 AM |
07 swing arm ? | REVERUP | Enduro Chassis & Body | 12 | 04-29-2007 08:59 PM |