|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Sachs fork manual
Hi
I got a EC 250 2011. I want to repair my front fork (fork oil, fork seals etc). Wheer can I find a manual of the Sachs fork, so I could find all the infos? |
#2
|
||||
|
||||
Hahah! Good luck.
What would you like to know? Are they the Sachs with the adjustable preload or no? Be CAREFUL with the rebound adjuster. Many have cross threaded them on reassembly, and replacements are non existant. 48mm KYB bushings and seals work a treat as far as consumables go. Air gap 110-130mm. Basic OC fork - just watch the rebound adjuster. My advice is to push it out of the cap once the cap is off the damping rod. On reassembly thread the adjuster into the damping rod. Then put the cap over the top and thread that down. |
#3
|
|||
|
|||
__________________
2003 txt250 Pro 2013 Ossa 280i |
#4
|
|||
|
|||
Without preload.
Fork oil suggestions? |
#5
|
|||
|
|||
7.5w according to twowheels on the forum
__________________
2003 txt250 Pro 2013 Ossa 280i |
#6
|
||||
|
||||
Work off viscosity.. Something in the range of say 20-24cSt@40 will do the job. Realistically the fluid is just another tuning variable, so pick one that works and stick with it.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Service manual for Sachs rear shock | MattR | Enduro Suspension | 9 | 10-19-2016 03:18 PM |
Replacing 45mm Marzocchi seals, fork service manual? | Jkosmo | Enduro Suspension | 10 | 09-06-2012 12:13 PM |
fork seal change sachs fork | Madhead | Enduro Suspension | 13 | 01-13-2012 07:49 PM |
sachs fork | moto9 | General Discussions & Announcements | 0 | 09-28-2009 07:51 PM |
Sachs Rear Shock Manual | MattR | General Discussions & Announcements | 1 | 05-05-2009 09:15 PM |