05-06 Marzocci valve specs

[pobit]

I happen to have two sets of forks appart today. An 05 DE200 and a 06 DE300. I found the Base valving is quite differant between the two years. The valves themselves are differant also as the 05 uses a 1mm bleed hole in the side of the port and the 06 uses a 2mm hole. Other notable differances is the 06 uses a bleed shim on the face with a 22mm shim that covers the ports. The 05 does not use a bleed shim but uses a smaller 21mm shim that does not cover the ports completely allowing some bleed. The cartridge, damper rod, bottoming cone and rebound valving is the same on both years. Only the base valves differ. Here are some pictures showing the differant shim stacks and differant size bleed hole in the base valves. Anyone have any imput on why the changes? Dave